How to use auto-focus camera to focus the microscope
Focusing of microscope is a difficult problem in the field,But with Buoth auto-focus camera, the problem is easily solved.
The specific steps are as follows :
Step one Find a rough working distance
Install the auto-focus camera and start drawing normally. Open the camera menu and select the FBL menu item.
Adjust the microscope to its maximum magnification, and then adjust the focusing hand wheel to make the image clear.
Step two Corrected focal
after correction coke Adjust the microscope to the minimum multiplier, open the camera menu and select AF.
After focusing, select MF and fix the rear focus (note only to change the focusing mode, do not manually adjust the motor position).
Step three Rectifying working distance
Adjust the microscope to the maximum multiplier, adjust the focusing hand wheel to make the image clear, lock the focusing hand wheel, and fix the working distance.
You will be surprised to find that the microscope is completely out of focus. If you cannot focus all the way, repeat steps 1 to 3.